The containment measures for micro-organisms from Group II shall be chosen by the user from the categories below as appropriate to the micro-organism and the operation in question in order to ensure the protection of the public health of the general population and the environment.
Type B operations shall be considered in terms of their unit operations. The characteristics of each operation will dictate the physical containment to be used at that stage. This will allow selection and design of process, plant and operating procedures best fitted to assure adequate and safe containment. Two important factors to be considered when selecting the equipment needed to implement the containment are the risk of, and the effects consequent on, equipment failure. Engineering practice may require increasingly stringent standards to reduce the risk of failure as the consequence of that failure becomes less tolerable.
Specific containment measures for Type A operations shall be established taking into account the containment categories below and bearing in mind the specific circumstances of such operations.
Specifications | Containment Categories | ||||
|---|---|---|---|---|---|
| 1 | 2 | 3 | |||
1. Viable micro-organisms should be contained in a system which physically separates the process from the environment (closed system) | Yes | Yes | Yes | ||
2. Exhaust gases from the closed system should be treated so as to: | Minimize release | Prevent release | Prevent release | ||
3. Sample collection, addition of materials to closed system and transfer of viable micro-organisms to another closed system, should be performed so as to: | Minimize release | Prevent release | Prevent release | ||
4. Bulk culture fluids should not be removed from the closed system unless the viable micro-organisms have been: | Inactivated by validated means | Inactivated by validated chemical or physical means | Inactivated by validated chemical or physical means | ||
5. Seals should be designed so as to: | Minimize release | Prevent release | Prevent release | ||
6. Closed systems should be located within a controlled area | Optional | Optional | Yes, and purpose- built | ||
(a) Biohazard signs should be posted | Optional | Yes | Yes | ||
(b) Access should be restricted to nominated personnel only | Optional | Yes | Yes, via airlock | ||
(c) Personnel should wear protective clothing | Yes, work clothing | Yes | A complete change | ||
(d) Decontamination and washing facilities should be provided for personnel | Yes | Yes | Yes | ||
(e) Personnel should shower before leaving the controlled area | No | Optional | Yes | ||
(f) Effluent from sinks and showers should be collected and inactivated before release | No | Optional | Yes | ||
(g) The controlled area should be adequately ventilated to minimize air contamination | Optional | Optional | Yes | ||
(h) The controlled area should be maintained at air pressure negative to atmosphere | No | Optional | Yes | ||
(i) Input air and extact air to the controlled area should be HEPA filtered | No | Optional | Yes | ||
(j) The controlled area should be designed to contain spillage of the entire contents of the closed system | Optional | Yes | Yes | ||
(k) The controlled area should be sealable to permit fumigation | No | Optional | Yes | ||
7. Effluent treatment before final discharge | Inactivated by validated means | Inactivated by validated chemical or physical means | Inactivated by validated chemical means | ||